CodeCogs

Returns the Nusselt number for a fluid going through a pipe.

You're viewing an older version of this page (#423). View the current version.

Interface

#include <codecogs/engineering/thermodynamics/convection/nusselt_intpipe.h>

using namespace Engineering::Thermodynamics::Convection;

inline double Nusselt_intpipe(double Pr, double Gr, double Re)

This module calculates the Nusselt number for a fluid which flows through a pipe, the flow being either laminar or turbulent. The fluid must keep its state of matter during the heat transfer process.

The formulae for each case are given by

${\rm Nu} = 0.15 {\rm Re}^{0.33} {\rm Pr}^{0.33} ({\rm Gr} \cdot {\rm Pr})^{0.1}\qquad \mbox{(laminar case)}$

(1)

and

${\rm Nu} = 0.021 {\rm Re}^{0.8} {\rm Pr}^{0.43} \qquad \mbox{(turbulent case)}$

(2)

where ${\rm Re}$ is the Reynolds number, ${\rm Pr}$ is the Prandtl number and ${\rm Gr}$ is the Grashof number of the fluid. If the Reynolds number is less than 2000 the flow is considered laminar, while if it is greater than 4000 the flow is considered turbulent.

Example 1

The following code calculates the Nusselt number for Air at 65 degrees Celsius flowing throug a pipe at 25 degrees with diameter of 0.5 meters. Both the laminar and turbulent cases are considered.

#include <codecogs/engineering/heat_transfer/convection/nusselt_intpipe.h>
#include <stdio.h>
 
int main()
{
  double Pr = 0.70849, Gr = 384057065.8607, Re1 = 800, Re2 = 5100;
 
  printf("\nAir at 65 deg. Celsius\n");
  printf("flowing through a pipe at 25 deg. Celsius\n\n");
 
  printf("Re = %.2lf (laminar flow)\n", Re1);
  printf("Nu = %.4lf\n\n", 
  Engineering::Heat_Transfer::Convection::Nusselt_intpipe(Pr, Gr, Re1));
 
  printf("Re = %.2lf (turbulent flow)\n", Re2);
  printf("Nu = %.4lf\n\n", 
  Engineering::Heat_Transfer::Convection::Nusselt_intpipe(Pr, Gr, Re2));
 
  return 0;
}

Output

Air at 65 deg. Celsius
flowing through a pipe at 25 deg. Celsius

Re = 800.00 (laminar flow)
Nu = 8.4761

Re = 5100.00 (turbulent flow)
Nu = 16.7463

Parameters

the Prandtl number of the fluid

the Grashof number of the fluid

the Reynolds number of the fluid

Returns

the Nusselt number of the fluid with given parameters

References

Dan Stefanescu, Mircea Marinescu - "Termotehnica"

Interactive Calculator

Result –